Clean the joint properly
Dust and old cement residue must come out, to a depth of at least 2 mm. A grout line that was not cleaned will peel at the edge no matter which product you use.
Second product line
Tile grout that holds its colour
Cement grout fails at the joint, not at the tile: it absorbs water, blooms white, and moulds in wet rooms. Our three systems are all resin-based, so the joint stays sealed and the colour stays where you put it.
Three systems
Colour-stable
Wet-area suitable
OEM colours on request
Selection
Which joint goes with which tile
The choice is driven by the tile surface and by how much light the room gets — not by price.
| Type | Character | Best for |
|---|---|---|
| Epoxy quartz-sand grout | Matte, sand-textured, close to the look of a stone joint; abrasion resistant and non-slip | Living areas, balconies, antique and matte tiles |
| Two-component gloss epoxy | Smooth, glossy, high hardness, easy to wipe clean | Kitchens, bathrooms, polished and vitrified tiles |
| Polyurea grout | Strongest resistance to yellowing under UV and daylight | Light-coloured joints, balconies, south-facing rooms |
Installation
Three rules that decide whether it lasts
The joint must be dry
No standing water before application. Applying into a damp joint traps moisture at the tile edge, which shows up later as bubbling or a white haze.
Tool at the right moment
Press the joint 15–30 minutes after filling, depending on temperature. Too early and the grout strings; too late and a skin has formed that will not press flat.
Together with repair
Injection pores have to be filled anyway
After a hollow-tile repair there are 8 mm ports in the surface, and grouting the floor means cleaning the joints. Running both operations in one visit saves a second set of access and cleaning — which is why we quote them together.
Buying the two lines together? The repair adhesive and the grout are made to the same colour range, so a repaired floor and a newly grouted floor finish in one tone rather than two.
Supply
Packaging and private label
Standard supply
Supplied as two components in fixed proportions, with the ratio printed on the label. Colour cards are available for the standard range.
Private label
Own brand, own colour names, own language. We can match a colour to a sample you send. See OEM & private label.
Ask for a colour card and a quotation
Tell us the tile type, joint width and the area to be grouted, and we will recommend a system and estimate consumption.